Hi, As per the datasheet we have removed the pull up resistors and directly short the pins to Vcc (3.3V) in our current test board, but in this board also the random address mismatch is showing ( the same scenario is explained in the above comment in which out of 6 attempts only 2 times we have received the response from the 4B slave ID and in all other trials we are receiving the acknowledgment from 48 only. ) In the current test application we are reading the full 4x ( x from 8 to B)slave IDs to check which address is currently configured. We are keeping the hardware as such in all the trials but the address configured is changing randomly.
↧