Forum Post: About TSC2004 Code of calibration
I want to get code of calibration for TSC2004 . If we have the code,could give me it? Thanks a lot.
View ArticleForum Post: TSW1400EVM + AFE5809EVM Automation
Hi everyone, maybe I am just being blind, but I am trying to interface our AFE5809EVM board which is connected to a TSW1400EVM board via USB. I can use the GUI that is provided by TI to setup the...
View ArticleForum Post: RE: TSW1400EVM + AFE5809EVM Automation
Joe, Are you trying to automate the AFE5809 or the TSW1400. The TSW1400 has good automation support, even in Matlab for HSDCPro. The AFE5809 GUI has no automation support, however. The AFE5809 EVM...
View ArticleForum Post: VSP5612 - recommendation for alternative Product
Hi Guys, for our Application we need a High Speed CDS (60MSPS@2Channel) with PGA and 1x parallel 8bit Output. What i saw is, that the VSP5612 would be perfect for our Application, because there will be...
View ArticleForum Post: RE: VSP5612 - recommendation for alternative Product
Christian, The VSP5610 / VSP5611 / VSP5612 are ACTIVE devices and in the next few days the datasheet for these devices will be updated to the production version. As for distribution stocking the...
View ArticleForum Post: RE: About TSC2004 Code of calibration
Hi Felix, What is the operation system? If you are looking for the calibration code, tslib is the most popular calibration library. You can find the source code here : . Andy
View ArticleForum Post: RE: VSP5612 - recommendation for alternative Product
Dear Kurt, Thank you for that useful Information. Is there any possibility that we get an preliminary Version of the Datasheet, only to check some details and see if this product will match our...
View ArticleForum Post: RE: TSW1400EVM + AFE5809EVM Automation
Dear Chuck, first, thank you for your very quick reply. What we want to do is able to programatically set some of the settings which can be controlled for the AFE, e.g. activate and change the...
View ArticleForum Post: RE: VSP5612 - recommendation for alternative Product
Christian, The full production datasheet is now out on ti.com in the www.ti.com/.../vsp5612 product folder. I hope it answers all your questions, Best Regards, Kurt
View ArticleForum Post: Performance of AFE5809 Data Converter test pattern
Hi, We are using AFE5809 in the test pattern mode to test our system performance. We would like to have more information on the test pattern. Can you please let us know in the toggle mode how many...
View ArticleForum Post: RE: Performance of AFE5809 Data Converter test pattern
Po, I've moved this post to the Imaging AFEs Forum. I think that you'll find an answer here rather than the /etc Data Converters Forum. Joseph Wu
View ArticleForum Post: RE: Performance of AFE5809 Data Converter test pattern
Po, The toggle mode will change toggle the value for every sample (Frame clock period). So, for 14-bit mode, the samples for one channel will be transmitted as 0 , 0x3FFF , 0 , 0x3FFF , 0 , 0x3FFF ,...
View ArticleForum Post: Is it possible to use TSC2007 without IRQ?
Hi all, We're planning to use an TSC2007 controled by i2c from HDMI output, the problem is that there is no IRQ line avaible on HDMI, so, is it possible to use TSC2007 by pure polling? And what would...
View ArticleForum Post: about adc141s628 on lmp91200eval
hi sir, i use lmp91200eval to measure water ph with a ph probe. i encouter a issue when reading adc141s628. that is i can't read negative value from adc141s628. the lowest value of adc141s628 is 0,no...
View ArticleForum Post: WinCE driver for ADS7845
Hello, Do we have WinCE driver for ADS7845 ? I can't find it from website. Thanks! Best regards, Sam Ting
View ArticleForum Post: RE: WinCE driver for ADS7845
Hi Sam, Unfortunately, we don't have a WinCE driver for ADS7845 . Instead, a Linux driver for ADS7845 is avaiable here : lxr.free-electrons.com/.../ads7846.c . Andy
View ArticleForum Post: RE: TSC2046 WEC 7 Driver
Hi Shun-Cheng, Unfortunately, we don't have a WinCE 7 driver for TSC2046 , but I think it should be very possible to migrate the WinCE 5 to WinCE 7 platform. Andy
View ArticleForum Post: RE: Is it possible to use TSC2007 without IRQ?
Hi Daniel, Yes, I think it is possible but it is not recommended. If the polling time is large than 10ms, the polling rate will be less than 100Hz. I believe you can still achieve an acceptable...
View ArticleForum Post: RE: Is it possible to use TSC2007 without IRQ?
Thank you Andy! Applying IRQ will need hardware routing so we'll go with poll right now for demosntrations propouses using the hardware we already have, then do the hardware routing and configure the...
View ArticleForum Post: RE: Is it possible to use TSC2007 without IRQ?
Hi Daniel, I suggest you try a polling rate 100Hz at the beginning. If there is nothing wrong with pointing and clicking, then try an even lower polling rate, such as 80Hz. Andy
View Article