Forum Post: TMP006 vs. Melexis
Hi there,I recommended the TMP006 to my customer and he is wondering if there is a version already packaged like the Melexis one ? Also, is there any distance advantage using this model versus the...
View ArticleForum Post: TSC2046 noise issues
Hi,I have a system with TSC2046 controller for a 2.8" TFT (DT028ATFT-TS). The touch screen is a 4 wire one with 300ohms for X and 600 ohms for Y. The analog connections are short, about 1/2 inch, and...
View ArticleForum Post: RE: TMP006 vs. Melexis
Hi Amy, We do not provide a packaged version of the TMP006. There are guidelines for creating a package, please have customer refer to these E2E posts:...
View ArticleForum Post: RE: LM35 pspice model
Hi Divya,Thermocouples have a non-linear transfer function but for a limited temperature you can assume a linear transfer function. I would like to refer you to an old app note AN225. In Appendix A...
View ArticleForum Post: RE: TMP121 IBIS model needed
Thank you Abhishek. It can be used for our design.Thank you. Regards,Karthik
View ArticleForum Post: material definitions for protecting lens
Dear Sir,I need to protect the tmp006 device in my application.What poly material is suggested. I plan to use a plano surface.and what is the recommended optimal thickness for such material?Any studies...
View ArticleForum Post: tmp121 problem / confirmation bit question
I'm using a TMP121 in a few boards, which seems to work well, except that logs show that every few 1000s to a few 100000s readings, a single temperature sample is read wrong, mostly twice or half the...
View ArticleForum Post: RE: TMP006 wavelength range
Dear, I’m planning to use the tmp006, your documentation(s) are missing some data, especially the wavelength spectrum (in micrometer or manometers), or sensitivity for this product, do you have such...
View ArticleForum Post: RE: TX-SDK-V2 setback while configuring
Hi Vidya,Yes, the beamformer output is corrected. As for the pulser, are all the supply voltages at the right levels? Did you click on the 'Enable High Voltage Pulser' botton?Regards,Charles
View ArticleForum Post: RE: Cant configure tmp102 temperature sensor
Hello Anja,I'm reading your code and trying to understand it and I need to you to answer the following questions:What does TM, EM and CR1 used for? I'm trying to correlate values assigned with TMP102...
View ArticleForum Post: RE: tmp121 problem / confirmation bit question
Hello Rolando,Thanks for posting some interesting questions on TMP121.Sorry about the confusion in the datasheet. TMP121/122/123/124/125 are based out of the same silicon die and confirmation bit on...
View ArticleForum Post: RE: material definitions for protecting lens
Hello Adel,There are two threads on the forum that discuss suitable cover materials for the...
View ArticleForum Post: TS5A26542YZTR - Dual SPDT Analog Switch
We have an application that will require part TS5A26542YZTR (NI part number: 697161-01) used in a condition where TA is 90oC. Since this part has an operating temperature range of -40oC to 85oC only,...
View ArticleForum Post: RE: Cant configure tmp102 temperature sensor
Hello Abhishek,Thanks for the response.TM EM and CR1 are register bits that needed to be set for managing Extended mode(EM), Thermostat mode(TM) and Conversion rate(CR1). Actually in probe of this...
View ArticleForum Post: RE: TMP006 wavelength range
Thanks Abhi, i have a major problem with this sensor, ... the speed... i need to find something faster... but still in the IR range...thanks againDaniel
View ArticleForum Post: RE: LM95701 accuracy error
Oops forgot to mention one last thing. These sensors measure the board temperature so you need to make sure that any devices on the PCB next to this LM95071 are at the same temperature on the different...
View ArticleForum Post: RE: TX-SDK-V2 setback while configuring
Charles,It would be great if I could get the existing board (tx-sdk-v2) exchanged. I can ship out the whole kit, if required, or only the Pulser/Receiver Board. We've been continually facing issues...
View ArticleForum Post: ADS7846 - Slow Recovery on N_PENIRQ
Dear TI Team,we are using an ADS7846 in one of our products.We have observed a number of units exhibiting 'sticky' button performance, where the soft buttons on the touch screen appear to get stuck...
View ArticleForum Post: RE: Cant configure tmp102 temperature sensor
Hello Ajna,Glad you were able to solve the issue and thanks for keeping us informed.Regards,Abhi
View ArticleForum Post: RE: TSC3060EVM availability and purchase
TI is not supporting capacitive touch controllers including TSC3060 any longer. Sorry for the inconvenience.
View Article