Forum Post: RE: CANT FIND DOCUMENT FOR SNOA839??
Hi,You can use the attached Excel file for your calculations.RegardsSatyanarayana Reddy(Please visit the site to view this file)
View ArticleForum Post: TMP431 Configuration register pointer address
Hi,Writing the TMP431 configuration register should be done by setting the pointer address to 0x09.Yet, it seems that write operation to address 0x03 (the read address of the configuration register)...
View ArticleForum Post: RE: TMP006 sensitivity
Hello Luo,The local contact we have for you is Chen, Longchang <andy-chen@ti.com>. He will be able to assist you.Thanks,Abhi
View ArticleForum Post: RE: LM96511EVK schematics
Hello Andy,The LM96511 EVAL board schematic can be found within the zip file that you get here when you click "Download" next to "LM96511EVK-SW":http://www.ti.com/tool/lm96511evkI've attached it here...
View ArticleForum Post: RE: TMP431 Configuration register pointer address
Hello Timur,Thanks for posting your observations on Read,Write operations on Configuration Register with pointer address 0x03. I will take a look at the digital design and get back with you.Best...
View ArticleForum Post: AFE5801 PGA static gain
Hello AFE5801 users,Please take note that, in order to work with fine gain in static pga mode, the bit INTERP_ENABLE needs to be set to '1' in addition to STATIC_PGA. It's not explicitly described in...
View ArticleForum Post: Can't find datasheet TMS320D610A002PYP
I have a chip #:TMS320D610A002PYP D11-3CD2E01 But I haven't been able to find a datasheet on Google or in the TI listings, plus TI has not responded to my email request.Can anyone help me find this...
View ArticleForum Post: RE: AFE5809EVM design files
Chuck, it says the file was deleted on BOX. Would you be able to use dropbox?Thanks,John
View ArticleForum Post: DS80PCI800EVK EEPROM chip
Hi,I'm planning to use this DS80PCI800EVK. in this there is a provision of using a SMBus based EEPROM for storing the Equalization and De-emphasis settings.What chip can be used in J18 of the EVK, can...
View ArticleForum Post: TMP421
Hello!One Question concerning the TMP421:We are not sure: can we leave the remote sensor-pins (DXP;DXN) leave floating when we want to use onlythe local Temp sensor.Thanks in advance!RegardsThomas Bilke
View ArticleForum Post: RE: Can't find datasheet TMS320D610A002PYP
Hi Brad,I can find nothing stating that this part exists. The prefix would say that this part is a DSP. You might try the DSP forum, as you have posted in the analog forum. Best regards,Bob B
View ArticleForum Post: RE: LM96194 unused pins
Hi Prachi,I’m sorry that I missed your posted. In the future, please post your thread in the Temperature Sensor Forum because I always take a peek every day in the forum to ensure that I reply them all...
View ArticleForum Post: RE: LaunchPad with CCS 5.5 variable duplicating
Hi Keith, Post this at the appropriate Tiva Forum below. Provide necessary details including code. http://e2e.ti.com/support/microcontrollers/tiva_arm/default.aspx- kel
View ArticleForum Post: RE: Out-of-Work OF LM75A EVM
Hi~ AaronWe did test by LM75AEVM.We checked temp value by LM75AEVM GUI in room temperature aging. But We found problem as below white box.Is this problem GUI?? or device??Please reply to me as soon as...
View ArticleForum Post: How to configure sensor o/p to BNC connector in LMP91200...
Hi All,I am using LMP91200 evaluation board for pH sensor. In this evaluation board three pin (Guard1,INP and VCM) of LMP91200 Ic connected with BNC Connector. I have another pH sensor whose three o/p...
View ArticleForum Post: RE: functioning of LM 96570
Hello Mariusz,I am currently working on a re-configurable Ultrasonic Hardware Platform. it would be great if you could share the application used to calculate delays. Here is my e-mail:...
View ArticleForum Post: RE: Out-of-Work OF LM75A EVM
Hi! AaronThank you for your answer.But My test result different to your test result.I did test as below : - Power On => Sample Rate(2 Sample/sec) => StartI did test repeately.
View Article