Forum Post: RE: TMP103 V+ Question
Hi Mayrim,Thanks for your quickly reply.After discussed with my customer, they will MP the project this monthly. If they don't want to change the circuit, does any risk to damage the IC or function issue?
View ArticleForum Post: RE: Configuring the LMP90100 AFE's IB1& IB2 as an AC current source
Hi Parami,Thank you for your question...we are reviewing it and will reply soon.
View ArticleForum Post: RE: Vref temperature trend of TL431B
Hamamoto-san,The shape of the Vref voltage across temperature varies part to part. The range for the change is stated in the data sheet tables for the TL431BC, TL431BI, and TL431BQ as [ <16mV,...
View ArticleForum Post: RE: Need Standalone Fan Controller like Microchip TC652
Hello, I'm looking for something that can control the fan speed in proportion to the temperature, like the microchip part.
View ArticleForum Post: TMP75B case
Hi,The TMP75B is a recent temperature sensor, but the only available case is SOIC-8.Do you plan to propose other case for the TMP75B in the future?Regards,Yann
View ArticleForum Post: RE: HDC1000 - Pull up/down resistor for ADRx pins
Hi Ed-san, Domenico-sanThank you for your support.I understood that you could directly tie ADRx pins to VCC or GND without a resistor.I have additional question.[Q2]If customer would like to use a pull...
View ArticleForum Post: RE: Polyethylene and polypropylene index of refraction at...
The effect of high-density polyethylene (HDPE)/polypropylene (PP) blending on the crystallinity as a function of the HDPE melt index was studied. The melting temperature and total amount of...
View ArticleClik here to view.
Forum Post: RE: LM98714 Initialization code
Hi Hooman.Thank you for your feedback.I made changes suggested by you.Now i am able see some pulses on CLKOUT pin and i captured some images from oscilloscope and same is shown bellow.Am observing some...
View ArticleForum Post: RE: Polyethylene and polypropylene index of refraction at...
Thank you Liu, but I was interested about the optical index of refraction.... Thanks anyway.
View ArticleClik here to view.
Forum Post: RE: TMP103 V+ Question
Hi Jerry,We do not guarantee any IC if it is used outside the Absolute Ratings. That configuration exceed our Input Voltage absolute maximum ratings. Best Regards,Mayrim
View ArticleForum Post: RE: LMP91000 configuration failed.
Hi Gangadhar,what do you mean for "I'm unable to read the status register" ? Do you receive a NACK or any other I2C error flag ? Or do you read "0" ?The status register is updated at power up of the...
View ArticleForum Post: RE: Vref temperature trend of TL431B
HiI appreciate your kind explanation.I understand.Regards,Koji Hamamoto
View ArticleForum Post: RE: TMP75B case
Yann,What size package are you looking for?We have a wide variety of temp sensors available in a wide variety of packages options. If you want smaller than the SOIC with similar performance please...
View ArticleForum Post: RE: TMP112 Conversion
Hi team,We are discussing this issue via email.Mayrim
View ArticleForum Post: RE: Launchpad LM4F120 and EB-LM4F120-L35 output display is dark...
This was not responded by Newark and TI community
View ArticleForum Post: RE: TMP75B case
Hello Dan,Thank your for your answer.My first aim was to change an old LM75 on an existent board by a compatible pin to pin chip like the TMP75B/C. But the actual footprint is a VSSOP case.May be we...
View ArticleForum Post: RE: TMP112 Conversion
Hi Bobby,The conversion time is a constant 26mSec but the delay between conversions can be changed. When a command is sent to change the conversion time (the delay between the 26mSec conversions) a...
View ArticleClik here to view.
Forum Post: RE: LM98714 Initialization code
Hi Govind,Thanks for the schematic that you emailed me. I don't see anything big standing out, but I have some comments:1. Wrong Period: I had noticed that the CLKOUT had a 146Hz repetition rate! Your...
View ArticleForum Post: RE: TMP75B case
Hello Yann,Would the TMP122-EP or TMP100-EP (package type SOT-23) work in your application? The Temp range is -55 to 125.Regards,Jamieson WardallSensing Applications
View ArticleForum Post: RE: TMP441
Hi Eli,The circuit you sent looks good. Please make sure to have pull up resistors (10k) on the SDA and SCL lines. To achieve the best performance when using a remote junction temperature sensor...
View Article