Forum Post: DRV2700EVM-HV500: Please suggest the transformer with higher...
Part Number: DRV2700EVM-HV500 Currently we are using the DRV2700 to drive the piezoactuator as fast as we can. The saturation current of ATB3225, you suggested in HV500 is 0.6A. It is too small for us....
View ArticleForum Post: RE: DRV2605L: Water repellent solution
Hi Kelly Thank you for your reply. While it is difficult to talk about a detailed application here, the target is a fan or a body of product ( made from metal, plastic and so on). Anyway, the purpose...
View ArticleForum Post: RE: TAS1020B: USB-MODEVM Interface
Thanks José, I need io430.h to run the firmware, it's not included. Could the firmware be run with USB-MODEVM Interface? Best Regards, Leila
View ArticleForum Post: RE: TAS1020B: USB-MODEVM Interface
Hi Leila, Yes, It should be able to run it. The communication between EVM and PC is performed with USB-interface. Best Regards José Luis Figueroa Applications Engineer
View ArticleForum Post: RE: TSC2013-Q1: About Interrupt signal
Hi Ogane-san, Do you want that the device sends an interrupt signal each touch detection? Best Regards José Luis Figueroa Applications Engineer
View ArticleForum Post: DRV2605: DRV2605 product feature
Part Number: DRV2605 Hi Team, customer is evaluate the DRV2605 and they got some questions below that need BU helps for comments. 1. In ERM mode, can the DRV2605 be able to output the constant...
View ArticleForum Post: DRV8662EVM: Suggestions for FET switches for connecting multiple...
Part Number: DRV8662EVM Hello, Hope you are well. I've previously asked about connecting multiple actuators for the DRV8662EVM , and the suggestion was to use FETs to switch between actuators. (...
View ArticleForum Post: RE: LM8300: Part marking decode.
Hello Nathan, I have been searching and I wasn't able to find this information. Even I contacted the person that supported these devices before me and He wasn't able to find this information. Best...
View ArticleForum Post: RE: LM8300: Software version number ($B2) response.
Hello Nathan, I have been researching and It seems that there isn't any information about this. As this device is very old, It is quite difficult to find this kind of information because the people who...
View ArticleForum Post: RE: TSC2013-Q1: About Interrupt signal
Hi Luis san Thank you for the reply. Yes, I want that the device sends an interrupt signal each touch detection by sleep status. But at default setting, the device send interrupt signal one time, the...
View ArticleForum Post: RE: DRV8662EVM: Suggestions for FET switches for connecting...
Hello, Hope you're well. We're still having this switching issue and would really appreciate your help. Or is there any other TI forum that we can ask for such issues? Thank you and hope to hear from...
View ArticleForum Post: RE: DRV8662EVM: Suggestions for FET switches for connecting...
Hello Kate, I am really sorry for the delayed answer. I will check this issue with our team and get back to you as soon as possible! Best regards, Marko
View ArticleForum Post: RE: DRV2700EVM-HV500: Please suggest the transformer with higher...
Hello Tina, thank you for posting your problem on E2E and sorry for the late response. Just to clarify, would you need a +150V output from DRV2700 itself to get even higher voltages or do you just need...
View ArticleForum Post: RE: TSC2013-Q1: About Interrupt signal
Hello Ogane-san, The device should detect each touch on the screen when you set D[6:3] = 0000 or D[6:3]=0001, as it is indicated on the datasheet. You can refer the Device Functional Modes section in...
View ArticleForum Post: RE: DRV2605: DRV2605 product feature
Hey Arthur, 1. & 2. For the first two questions: the output voltage level is set by using the rated voltage register , 0x16. Now, this device does have a slightly varying output voltage over the...
View ArticleForum Post: RE: DRV2700EVM-HV500: Please suggest the transformer with higher...
Hi Marko, I use the reference circuit of http://www.ti.com/tool/drv2700evm-hv500
View ArticleForum Post: RE: DRV2700EVM-HV500: Please suggest the transformer with higher...
Hi Marko, I use the reference circuit of DRV2700EVM-HV500 which can have 500V output voltage. But I only need 150V. and I need around 60mA output current capability. But in the BOM of your...
View ArticleForum Post: DRV2511-Q1: Could the analog input be used for current feedback ?
Part Number: DRV2511-Q1 Hi Team, My customer studies the DRV2511 for a voice coil application, lots of channels are involved. To simplify the system it would be very convenient to used the analog input...
View ArticleForum Post: RE: DRV2700EVM-HV500: Please suggest the transformer with higher...
Hi Tina, Please contact TDK or other inductor manufactures and asking them about what inductors they have available to support 150V and a higher current rating. The inductors we have investigated will...
View ArticleForum Post: RE: DRV2511-Q1: Could the analog input be used for current...
Hi Frank, We will look into this and get back to you as soon as possible. Also once we find the solution we will look into revising the datasheet to better help future cutomers.
View Article