Forum Post: TMP006 plus lens
Can we use TMP006 with small window and lens to make a temp probe to scan surface temp of power semiconductor devices or PCB?
View ArticleForum Post: 'Pin Functions' of DRV2605?
Hi There,I would like to know the functions of each 'Pin' in DRV2605? Like which one for 'EN', which one for 'SDA'.... Could any one help me to understand this?Thanks for reading.
View ArticleForum Post: TMP006 Student Project
As a part of a systems analysis class, we are creating a fictitious temperature sensor application. Basically all we need to do is come up with all the components and describe how they will all work...
View ArticleForum Post: RE: Analog input range of AFE5801 when AC coupling is used
In the datesheet, for Analog input pins (INiP, INiM) to AVSS, the ABSOLUTE MAXIMUM RATINGS value is -0.3V to MIN (3.6V, AVDD3 + 0.3V), but the RECOMMENDED OPERATING CONDITIONS is –VCM – 0.5 to VCM +...
View ArticleForum Post: RE: TMP422 with diode connected PNP transistor
GoodMorning Chris,well the problem was due to a wrong register counter increment in our software, now with the transistor tied near the board all is working fine,we will connect the transistor trought...
View ArticleForum Post: LMP91051
The LMP91051 is specified as a thermopile AFE. Can it also be used with pyroelectric detectors?
View ArticleForum Post: RE: TMP006 Transient Correction
Hi Ian,Sorry, I have problem to login E2E these days. I mean the TMP006 consumes very little power and does not self-heat by any more than fractions of a degree.I have modified the PCB. Could you...
View ArticleForum Post: RE: TMP100 - SDA pin internal short to GND
Hello Chris,I'm keeping couple of sensors on test - so far no failures.Your specification for the device shows low level of output at 3mA. What is the maximum sink current?Timing diagrams for register...
View ArticleClik here to view.
Forum Post: RE: TMP100 - SDA pin internal short to GND
Jacek,The maximum sink current that we specify and assure in the datasheet is 3mA. I discussed this with the designer and the the device can easily sink 2x this current. This current is temperature and...
View ArticleForum Post: RE: TMP422 with diode connected PNP transistor
Massimo,I am glad to hear this was resolved. Please let me know if I can be of further assistance.
View ArticleForum Post: RE: TMP006 Transient Correction
Hi Luo,I don't see an attachment in your post. Can you please re-upload it?Best regards,Ian Williams
View ArticleForum Post: RE: TMP006 plus lens
Hello Panson,Semiconductor devices and PCBs are good radiators of IR, so this would be a feasible application.Best regards,Ian Williams
View ArticleForum Post: RE: TMP006 Student Project
Hi Tanner,This question is better suited for a smartphone hobbyist coding forum, as we don't have expertise in such areas. I don't know if the OS installed on the phone would be able to detect the...
View ArticleForum Post: RE: TMP006
Hello Joey,The TMP006EVM as-is only supports the A0 and A1 pins being tied directly to GND. You could remove the resistors R1 and R2 and re-wire the board, connecting the A0 and A1 pins to different...
View ArticleForum Post: RE: Eight TMP006 on a signle bus
Hello Joey,Yes, communicating with more than one TMP006 sensor using the EVM modules is possible. However, it requires some hardware and software modification.On the TMP006EVM, resistors R1 and R2 pull...
View ArticleForum Post: Driving ERM using DRV2603 haptic driver
Hi,I searched in the datasheet but did not manage to find the maximum output current of DRV2603. My application is about driving an ERM motor (307-002 cylindrical type) however its supply current is...
View ArticleForum Post: RE: TMP006 preferred layout details?
Dear Joe, It will be helpful to create footprint for BGA package if you provide complete mechanical specefications. Basavaraj
View ArticleForum Post: LM71Q SPI temp sensor verilog model availability?
Hi,I have the LM71Q spi temperature sensor on my newly designed PCB and would like to know if there is a verilog or vhdl simulation model available for it if I'm writing a testbench to simulate my...
View ArticleForum Post: RE: LM71Q SPI temp sensor verilog model availability?
Hi Peter,We do not have the verilog or VHDL simulation model. Sorry.Aaron
View ArticleForum Post: TMP422-EP radiation robustness?
Hi,the TMP422-EP is a High-Reliability product, but it is not "Space Qualified": is it possible to get this qualification for it? What I additional need is some information on the radiation robustness...
View Article