Forum Post: RE: Lock-up of LM92 temp sensors
Is there any action on TI on this, after more than 1 year?Can we return our LM92s?
View ArticleForum Post: RE: TMP101 leakage current on Alert
Hello Dirk,The maximum leakage current on ALERT (output) pin at 125degC will be <1uA (0.2uA typically). Since this is an open drain output pin the current direction will be into the device ie. From...
View ArticleForum Post: RE: ts3a225e jack selection
Hello Mauro,It would be great to get the reference schematics. My e-mail: eek@autovisus.ru.Thanks a lot!
View ArticleForum Post: RE: Adaptor Board TXSDKV2 and XEM3001
Hi Praveen,Yes, you are right. The adapter board should be plugged into JP2 of the XEM3001, instead of of JP3 as mention in the user guide. Sorry about the unsolder header.Regards,Charles
View ArticleForum Post: RE: WaveVision 5 and LM96511
Hi Peyman,My email is kfirouzi@stanford.edu.I double-checked the Jumpers, they are in the correct places as in the guide.Kamyar
View ArticleForum Post: RE: Need Help for Ultrasonic Imaging Applications of...
Hi Suresh,Yes, the pulser can be operating at VPP=-VNN=30V. During power on, when you set VPF to 20V. Is VPP still power off?You need to be careful when applying VPP, VPF, VNF and VNN voltages. The...
View ArticleForum Post: RE: Please Suggest a Temperature sensor
Sir My project is for measuring room temperature in a work space. I need a temperature sensor atleast an accuracy of one decimal point at a temp range of -40 to +150C. Please suggest a good...
View ArticleForum Post: RE: Please Suggest a Temperature sensor
Hi Prasanth,The LM57 analog temperature sensor would be the best choice for your application. Many microcontrollers have built-in ADCs that you can use to monitor the output voltage of the LM57. Please...
View ArticleForum Post: Temperature Sensor Tmp101 sensing distance in a PCB of around 5inch
My question is Tmp101 chip itself acts has a sensing device so what is the maximum distance that it can able to sense the temperature in a PCB of 5inch.Or guide me sensor which can able to sense temp...
View ArticleForum Post: RE: Questions about TX-SDK-V2 EVB
Hi charles, we are interested too.Regards.
View ArticleForum Post: RE: Adaptor Board TXSDKV2 and XEM3001
Hi Olivier,Everything TI provide would be in the zip file from the following link.http://www.ti.com/tool/tx-sdk-v2#Technical%20DocumentsRegards,Charles
View ArticleForum Post: RE: Need Help for Ultrasonic Imaging Applications of...
Hi Suresh,1) The TX_SDK_V1 and TX_SDK_V2 are the only EVMs for TI's HV pulser.2) TI internal has power module with power on/off sequence built in for the above mention EVMs. However, it's not for sale....
View ArticleForum Post: RE: LM60BIM3 - Device Failure Risk & Accuracy below -25C?
Hi Ilya,I just noticed an inconsistency in the datasheet I will get back to you on this. It may take me a few days. Do you need this information urgently?I'm just curious why you are interested in the...
View ArticleForum Post: RE: Lock-up of LM92 temp sensors
Hi Lu,We are sorry you are having issues with the LM92. We have a formal process for handling customer returns. I'm sorry but I cannot help you directly. Please contact the distributor you purchased...
View ArticleForum Post: RE: LM60BIM3 - Device Failure Risk & Accuracy below -25C?
I am using the LM60 in a current product here at DEKA.
View ArticleForum Post: RE: Adaptor Board TXSDKV2 and XEM3001
Hi Praveen,Sorry, I confused myself too.The adapter board SHOULD connect to JP3 of the XEM3001 instead of JP2 as stated in my previous post. The adapter should be on top of the XEM3001. Here is the...
View ArticleForum Post: RE: Temperature Sensor Tmp101 sensing distance in a PCB of around...
Hello Basavaraj,TMP101 or any of the local temp sensors will be able to measure the temperature of the PCB exactly at its location (not 1-2 inches away). This being said I would like to clarify that it...
View ArticleForum Post: LM35 load current
trying to find out if the LM35 can regulate it's output with current applied to the output pin. The spec only covers load current flowing out of the part. In my application, I have a 2.5v reference...
View ArticleForum Post: TOF OPT9920
hii have to deal with TOF OPT9920 module and its working with DM8157 processor. I have no idea about TOF controller. I want to know about confidence and ambient related to its depth data.ThanxRavi Kant
View ArticleForum Post: RE: Time of Flight Chipset, OPT8140 / OPT8130, VSP5324 and OPT9110
Mark,Please monitor www.ti.com/3dtof for updates.The full data sheets will be on ti.com and the CDK will be available for ordering by the end of the year.
View Article