Forum Post: Why LM73 temperature is wrong?
All My CTm use LM73. They find temperature of LM73 will wrong one time after several thounsand time read.But the other registers is still right when read the wrong temperature. Who can help me?
View ArticleForum Post: RE: TMP006
Logic 1 means the pin is tied "high" so that the voltage on the pin is a constant DC level that exceeds the VIH spec of 2.1V. SDA means the pin is tied to the SDA signal (I2C data line).
View ArticleForum Post: RE: About the power-on-reset(POR) time of TMP102 and TMP75
Dear Ichiro-san Thank you for the reply. The customer has you inquiring by TMP102. Then, is it possible that I have it told how the architecture differs by TMP102 and TMP100? (Information is...
View ArticleForum Post: RE: TMP006 and the I2C bus
Chris, John, Thank you for your help. My original thought was that there mignt be an error in the documentation but I haven't found anything to substantiate this. ITAR prevents me from submitting the...
View ArticleForum Post: RE: AFE5851 EVM & SP605
Rino, Yes, I talked with Richard today. I don't have experience with this matlab code, so it would be difficult to modify the matlab code to work with the TSW1250. That is unless it ports easily as...
View ArticleForum Post: RE: MSC (MicroSystem Controller) family
Andrew, The MSC1210EVM is a full EVM with external memory, 2 UART connections, and full access to all ports of the MSC1210, and includes a connector for the emulator. It also has a small prototyping...
View ArticleForum Post: RE: Why LM73 temperature is wrong?
Hi Seasat, In order for me to understand the customer setup, I would like the customer to provide detail on the following questions. Since the customer was able to read the register, this confirms that...
View ArticleForum Post: RE: About the power-on-reset(POR) time of TMP102 and TMP75
Hi Satoshi-san, 1. For POR, difference between the TMP100 and the TMP102 is as follows. TMP100 invokes POR when VDD is lower than 0.3V with 100ms or more. TMP102 invokes POR when VDD is low in short...
View ArticleForum Post: Need information for p/n TMP431ADGKT
Hello, Please provide Thermal Resistance Junction to Case (Theta JC) for part number TMP431ADGKT Regards Raghu
View ArticleForum Post: Need information ADS8519IBDBG4
Hi, Please provide Thermal Resistance Junction to Case (Theta JC) for part number ADS8519IBDBG4 Regards Raghu
View ArticleForum Post: RE: How can reset LM73
Hi Seasat, I may not be clear regard to the implication of power down. Yes, you can reset the device. It can be power cycling the part or a software power down. Here are the step sequences for software...
View ArticleForum Post: RE: TMP006 and the I2C bus
Hi Tim, The DRDY is an open drain output, and shouldn't affect the proper functionality of the part if it is left floating. One option to determine if the device is being damaged during assembly would...
View ArticleForum Post: RE: Need information for p/n TMP431ADGKT
Hi Raghu, Thank you for inquiry. I am afraid it may took usually two weeks to answer. I will let you know as soon as the simulation result become available. Best regards, Ichiro Itoi
View ArticleForum Post: RE: TSC2004
Hello Jens, I need taking some time to look into your code but, the first of all, may you tell you what is the problem or issue? You mentioned that the TSC2004 interrupt output pin (PINTDAV) starts to...
View ArticleForum Post: TMP006 solder ball alloy composition
Hi, Will you please tell me the detailed alloy composition of the solder balls on the TMP006 package? The data sheet only says "SNAGCU"; any chance they are SAC 305 or SAC 405 alloys? Thanks for the...
View ArticleForum Post: RE: LMP91000EVM Gas Sensor Development Board Question
Hello Nick, the LMP91000 when supplied at 5V, and configured in order to use the supply as internal source of Voltage Reference is able to generate a maximum differential voltage between RE and WE...
View ArticleForum Post: RE: TSC2004
Hello Jens, By looking into your code, I found that you had programmed the TSC at the TSMode 2 (Host-Controlled and X-Y Scan Mode) and with /PINTDAV pin as /PENIRQ. Therefore, the /PENIRQ pin should...
View ArticleForum Post: RE: TSC2046E linux device driver code.
Hello Giridhara, I have a TSC2046 Linux driver source code, that had been tested with TI OMAP2430 processor. Please tell me your email address so that I can email it to you! Regards,Wendy F.
View ArticleForum Post: RE: INA 156 Gain selection Problem
Hello Ganesh, It does not appear as though your 3-wire RTD is connected correctly. Please take a look at the following application note (Figure 6 in particular):...
View Article