Forum Post: RE: Image sensor for LM98725
Hi, Hooman.Thank you very much for your answer.
View ArticleForum Post: RE: TMP275 stuck with one value
Hello Abhi,Thanks for your quick response.Yes, voltages on addressing pins are OK. Matter a fact I tried all 8 addresses of the device (several times) and device always correctly responds at chosen...
View ArticleForum Post: RE: Temperature sensor for measuring human body temperature
Hi AngyerHow is your project now, did you use microwave method in the end? ThanksXiong
View ArticleForum Post: RE: HDC1000 - Pull up/down resistor for ADRx pins
Hi Juan,why do you need the pull-down and pull-up resistance at the ADRx pin ?In the DS we suggest to tie those pins to VDD or GND.In the EVM there is the apprach with the pull-down and pull-up...
View ArticleClik here to view.
Forum Post: RE: REF5050
Tony,It is a semicunductor industry-wide standard to life-test all new products for an equivalent 10-year operation at 25C and there are many industry standards like this that are not specifically...
View ArticleForum Post: RE: Ground for digital pots
Then I do not know. I was referring to a case where there is one common plane for all and you can call that net "GND" so no question of star arises. If you have two net names then they can be tied at...
View ArticleForum Post: RE: Device for Body Temperature Measurement
Hi Nick,Glad to be of assistance.Watch for the TMP007 Layout and Assembly Guide SBOU143; it will be out soon and gives guidelines on optimizing layout to get the best performance as well as potential...
View ArticleForum Post: ADS7843 PENIRQ Pullup resistor
I am using ADS 7843. Touch screen is working almost 100% time, with bench setup. But once we install setup in noisy environment we have random button press near x = 0 location. Software check PENIRQ...
View ArticleForum Post: RE: TSC2003 measuring up to 32VDC
Also in a prototype design, the TSC2003 doesn't begin logging data until the screen is touched for the first time. Is there a way to begin loggin data immediately upon power up? Thanks!
View ArticleForum Post: RE: TSC2003 measuring up to 32VDC
Thanks Andy. That should answer our main question. I owe you some feedback on the start-up question. Stay tuned. Thanks!
View ArticleForum Post: Multichannel Temperature sensor AFE
I am looking for a multichannel(4 or 8) thermocouple or other temp sensor AFE with SPI or I2C output. I looked at LMP90100.Looks like it's 3 channel with 1 channel for cold junction compensation. Any...
View ArticleForum Post: RE: TMP006 calibration with transient correction
Hello Werner,The material is PP plastics, not brass. The object is very close to TMP006, 5mm. The size is much greater than distance, 30mm.I were writing matlab scripts to find good fitting in past...
View ArticleClik here to view.
Forum Post: TMP441 Local/Remote Temperature Error
Hello Team,I'd like to ask you about Local/Remote Temperature Error.Our customer measured TMP441 under bellow the circuit structure (Room temperature is 20 C).However the differences between Local and...
View ArticleForum Post: RE: TSC2004EVM-PDK / Don't operate on Win7 OS
Hello Sonoki-san, Since the evaluation software for the TSC2004EVM was designed for Windows XP platform when it was released, you will not able to run the software in a Windows 7 machine even you can...
View ArticleForum Post: RE: About flick with TSC2046E
Hi Hirata,In really products, TSC2046E usually works with more powerful MCUs than MSP430, such as ARM9, ARM11 and Cortex A8. Personally, I tried connecting the TSC2046E with a Cortex M3 MCU via SPI...
View ArticleForum Post: RE: Resistive 4-wires panels for multi touch gestures using am3358
Hi Erica,First, If you are looking for multi-touch resistive controller, I suggest you try TSC2013-Q1, which is a dual touch controller just released.I'm quite sure that you can enable an external...
View ArticleForum Post: RE: Problem with tsc2046 + DM365
Hi Kevin,Did you use the driver for TSC2046E from the Linux kernel? Do you still have the issue you were talking about?Andy
View ArticleForum Post: RE: TSC2004 X and Y connection
Hi Rafi,It is OK if you swap X or Y signals. Calibration will fix this when it is applied. Andy
View ArticleForum Post: RE: Process/wafer size
Sindhu,I see that you have not received an answer to your question. Be aware that comparators are fabricated on many different IC processes and supported by several different product groups in TI. Your...
View ArticleForum Post: RE: TMP441 Local/Remote Temperature Error
Hi Hidetoshi,Thanks for using TI E2E Forums. In order to understand the cause of the differences between Local and Remote temperature I would need more information from the customer. An schematic...
View Article